Supports 4 HDMI input ports (Port 0/1/2/3) with on-chip EDID RAM for each port.
Support HDMI/MHL dual mode in RX0 port.
On-chip 4 HDCP RX ciphers which support Instant Port Switching (IPS).
Supports 4 HDMI output ports with on-chip HDCP TX cipher for each port.
Support 32 combinations of matrix switching.
Support wide Frequency Range: 25MHz - 340MHz TMDS clock
Supports 12-bit Deep Full HD, Full 3D and 4K2K video.
Supports Standard Audio, DSD Audio and HD (HBR) Audio
On-chip HDMI Receiver and Transmitter core which are compliant with HDMI 1.4 specification
On-chip HDCP RX/TX Engines support Repeater and are compliant with HDCP 1.4 specification
HDMI-CEC passthrough
Supports Standard Audio, DSD Audio and HD (HBR) Audio
Source Signal Detection in Low Power mode
On-chip Power Regulator which provides regulated 3.0V and 1.6V power
Low stand-by current at power down mode
Gold plated to ensure smooth, corrosion-free connections
Easy 1-2-3 PCI-MX setup
1. Turn off and open computer chassis. Install PCI-MX and connect the USB internal cable.
2. Turn on computer and make sure you have the silabs driver installed (see download section).
3. Run the Matrix command line tool to configure the unit as you wish.
Got questions ? We have answers !
How to control/configure the PCI-MX ?
Once the card is installed and once you have the Silabs drivers installed, simply run the control software from a command line prompt.
You can get a command line prompt under windows by clicking START button, then enter "CMD" in the search field.
To get an overview of the possible commands available, simply write the software name (you can rename it if you need)
Usage : PCIXMatrix
PCIXMatrix.exe 2x1 (Input 2 routed to the output 1)
PCIXMatrix.exe 2x3 (Input 2 routed to the output 3)
Other commands :
Hot Plug: PCIXMatrix.exe HPDx1 (Perform Hot Plug events on input 1)
EDID Sel: PCIXMatrix.exe AutomixEDID or FixedEDID or CustomEDID
Advanced Audio: PCIXMatrix.exe ADVAUDIO_ON or ADVAUDIO_OFF
Reset HDMI: PCIXMatrix.exe RESTART_SOURCE or RESTART_SINK
How do you turn ON/OFF the furious feature ?
Try to locate a hacked firmware file for this ;)
What kind of routing option are available ?
Case 1:
Input 1 can go to Output 1 + 2 at the same time
Input 2 can go to Output 1 + 2 at the same time
Input 2 can go to Output 3 + 4 at the same time
Input 3 can go to Output 3 + 4 at the same time
Input 4 can go to Output 3 + 4 at the same time
Case 2:
Input 1 goes to Output 1
Input 2 goes to Output 2
Input 3 goes to Output 3
Input 4 goes to Output 4
4-IN 4-OUT HDMI Repeater with Equalizer
Silabs Driver 4.0.0 for XP/WIN7/8/10
